How To Connect DJI RC To WiFi?

A Drone enthusiast bought the first drone of his life and was super excited to fly it. However, his expectations and joy turned to distress when he realized that an extra step needed to be completed before live-streaming the drone footage. He had no idea about how to get it done and was left clueless about the next step.  

This is my story where I had to take a couple of twists and turns before I was able to use live streaming on my DJI RC. I realized how big the problem was, yet there was no solution for it. Later on, I figured out that the only way to do this was to connect DJI RC to WiFi. 

Since the connection process was complex and had no solutions on the internet, I decided to create a detailed guide on How To Connect DJI RC To WiFi so that you do not have to go through the same. In addition to those detailed steps, I will include a troubleshooting guide for connecting DJI RC to WiFi, ways to connect it to your phone, and the process of resetting the controller. 

How To Connect DJI RC To WiFi? 

Here is a 4-step simple solution to the most asked question How To Connect DJI RC To WiFi: 

Step 1: Turn On DJI RC 

If you are wondering how to turn on DJI RC, then press the power button, which is typically a small button on the right-hand side of the control panel. Once you press it, LED lights will start to glow green to indicate the turning on of the RC.

Step 2: Enable WiFi on DJI RC

Once your DJI RC is successfully switched on, swipe down from the top edge of the screen to bring down the notification panel. Then, swipe again to access the quick settings menu. From this menu, enable WiFi by tapping on the WiFi icon once. 

Step 3: Open WiFi Settings on DJI RC

After enabling the WiFi, tap and hold the same WiFi icon to open settings and choose the desired WiFi network from the scanned list of available networks. 

Step 4: Connect DJI RC to WiFi

Tap on the correct WiFi network and enter the password to finish the connection process. A “Connected” message will appear for confirmation. 

Does DJI RC Need WiFi to Work?

No, DJI RC does not require WiFi to work. These remote controllers operate using radio frequency (RF) to connect with and control DJI drones. An additional benefit of connecting RC to WiFi allows you to do live video streaming on your smartphone. 

How Do I Turn on the WiFi on My DJI?

If you are wondering how to turn on DJI RC, then follow these steps: 

Step 1: Press the power button present on the right-hand side of the control panel. 

Step 2: Wait for LED lights to glow green. This will indicate the turning on of the RC.

Can I Connect My Phone to DJI RC?

Yes, you can easily connect your smartphone to a DJI RC. Why should you connect? The connection will allow you to use the DJI Mobile app to access features such as live video streaming, flight telemetry, camera settings, and more. 

How To Connect DJI RC to Phone?

To connect your DJI RC to any smartphone, follow these steps:

Step 1: Turn on the DJI Remote Controller

Press the power button on your DJI RC to turn it on. 

Step 2: Download DJI Mobile App 

Depending upon the model of your DJI RC, download the appropriate DJI Mobile app and log in to your account.  

Step 3: Connect Your Phone to the Remote Controller

Head to the WiFi settings of your smartphone and wait for available networks to appear. From the WiFi networks list, choose the one starting with “DJI” and enter the password from your DJI RC manual. 

After following Step 3, your Phone will get connected to DJI RC.

Also, Read How to Connect Alexa to Wi-Fi Without an App?

How Do I Connect My DJI RC to Internet?

To connect your DJI RC to the internet, you follow these methods:

Method 1: Download the DJI mobile app on your smartphone and pair it with the DJI RC. Once the two devices are paired, Connect DJI RC to WiFi by following the steps listed above. 

Method 2: Turn on your DJI RC, scroll down from the notification bar and open WiFi settings to connect it to WiFi.

How To Update DJI RC?

  • How To Update DJI RC Using Software
  • How To Update DJI RC Using Software
  • How To Update DJI RC Using Software
  • How To Update DJI RC Using Software
  • How To Update DJI RC Using Software
  • How To Update DJI RC Using Software
  • How To Update DJI RC Using Software
  • How To Update DJI RC Using Software
  • How To Update DJI RC Using Software

There are two methods to update your DJI RC. In the first method, you will see an Update available popup on the main screen of your DJI RC as soon as you turn it on. You can click on it to start updating the firmware. In case you do not see the same popup, follow these steps:

Step 1: Enable WiFi on DJI RC

Once your DJI RC is successfully switched on, swipe down from the top of the screen to bring down the notification panel. Then, swipe again to access the quick settings menu. From this menu, enable WiFi by tapping on the WiFi icon once. 

Step 2: Open Connection Guide on DJI RC

On the homepage, tap on the Connection Guide button available on the bottom right corner. 

Step 3: Open About on DJI RC

Under the Connection Guide option, tap on the three dots appearing on top right corner. Then open the About menu and tap on the “Aircraft Firmware” option to start updating. 

Note: Clicking on “Aircraft Firmware” will update both the DJI Drone (Aircraft) as well as the DJI RC even if the drone is not connected to the RC.

Also, Read How to Connect Hisense AC to Wi-Fi

What is the Password for DJI RC WiFi?

If you are connecting DJI RC to a phone, then you will require the default WiFi password for it. There are two ways to find that password. Here is the list: 

Method 1: DJI Drones/RC Default Passwords

Name of the DroneDefault WiFi Password
Mavic dronesmavic12345
Phantom 3 Standard000000
Phantom 4 Advanced000000
Inspire 1S 1234567890
Mavic 2 Pro/Zoom/Enterprise1234567
Table of Default WiFi Passwords for DJI RC

Method 2: Below DJI Drone Battery

If passwords mentioned in the first method fail to work, then open the propellers of your DJI Drone and press the two spring buttons to release the battery. Under the battery, the Wi-F- name (SSID) and password will be available. 

DJI RC Controller Not Connecting to WiFi

If you are unable to connect DJI RC to WiFi or the connection is unstable, then you are not alone. A lot of users have reported the same and the main reason turns out to be a weak WiFi connection or the RC going too far from the WiFi range. 

Here are the steps that you can follow to fix the WiFi connection problem on DJI RC:

1. Restart DJI RC and WiFi Router

Sometimes, a simple restart can resolve connectivity issues. Turn off both your DJI RC and WiFi router to restart and attempt the connection again.

2. Check WiFi Settings and Range 

Ensure that WiFi is enabled on the DJI RC and it is within the range. Sometimes, the distance between your wireless router and DJI RC may cause connection problems.

3. Verify the Password on your DJI RC 

Ensure that the WiFi SSID (name) and password are unchanged. If you change either of these settings, then you need to perform the connection process once again.

4. Check for Interference on Your DJI RC 

Interference from other devices or networks can disrupt WiFi connections. Try moving to a different location away from potential sources of interference, such as other electronic devices or crowded WiFi networks.

5. Update Firmware of DJI RC and Drone 

Ensure your DJI RC and your drone’s firmware are current. Sometimes, firmware updates can include fixes for connectivity issues.

6. Reset WiFi Settings on DJI RC 

On your DJI RC, there may be an option to reset WiFi settings to default. Consider resetting the WiFi settings and attempting the connection again.

7. Contact Support of DJI

If you’ve exhausted all troubleshooting steps and still can’t connect your DJI RC to WiFi, it may be a hardware issue. I recommend raising a ticket with DJI customer support for further assistance.

Also, Read How to Connect a Wi-Fi Camera to a Mobile

Conclusion

This brings me to the end of this detailed guide on How To Connect DJI RC To WiFi. Through this guide, you can establish a WiFi connection between the controller and the drone and enjoy additional features such as live streaming, remote controlling the GPS, Speed, etc., and updating your DJI drone’s firmware. 

If you have more questions on this topic, then drop them in the comments and I will try to fix it for you.

Frequently Asked Questions

How To Connect DJI RC To WiFi? 

You can connect DJI RC to WiFi in 4 simple steps. Here is how:
Step 1: Turn On DJI RC 
Step 2: Enable WiFi on DJI RC
Step 3: Open WiFi Settings on DJI RC
Step 4: Connect DJI RC to WiFi

Does DJI RC Needs WiFi to Work?

No, DJI RC does not require WiFi to work. These remote controllers operate using radio frequency (RF) to connect with and control DJI drones. An additional benefit of connecting RC to WiFi allows you to do live video streaming on your smartphone. 

How To Connect DJI RC to Phone?

To connect your DJI RC to any smartphone, follow these steps:
Step 1: Turn on the DJI Remote Controller
Step 2: Download DJI Mobile App 
Step 3: Connect Your Phone to the Remote Controller

Leave a Comment